Skip to content
Technical University of Munich

Prof. Malte Jaensch, PhD, MBA

Head of the Institute

Technical University of Munich
School of Engineering and Design
Institute of Sustainable Mobile Powertrains

Schragenhofstraße 31, 80992 Munich
Phone.: +49 89.289.24102
Fax: +49 89.289.24100
Raum: ML 004
malte.jaensch(at)tum.de

Prof. Jaensch researches and develops powertrains for future, sustainable mobility. His research interests comprise internal combustion engines operated with synthetic fuels, electric drivetrains and powertrains using hydrogen as energy carrier. The focus is on vehicle applications and the holistic combination of simulation, experiment, and prototype development.

Prof. Jaensch studied Mechanical Engineering at TU Braunschweig and received a PhD in Mechatronics from Imperial College London. The following seven years he worked as co-founder and head of engineering at EVO Electric, an electric machine start-up. In parallel, he studied towards a MBA in technology and innovation at Imperial College Business School. 2013, he returned to Germany, to establish, grow and lead the electric drivetrain department at Porsche Engineering. Since 2021 Prof. Jaensch is at TUM.

Publications

2024

  • Armbruster, F.; Gelner, A.; Zepf, A.; Prager, M.; Härtl, M.; Jaensch, M.: Investigations on particle emissions of large-bore engines powered by natural gas and hydrogen. Environmental Science Advances, 2024 more…
  • Armbruster, F.; Kraus, Ch.; Prager, M.; Härtl, M.; Jaensch, M.: Optimized Emission Analysis in Hydrogen Internal Combustion Engines: Fourier Transform Infrared Spectroscopy Innovations and Exhaust Humidity Analysis. SAE International Journal of Engines, 2024 more…
  • Huang, R.; He, H.; Su, Q.; Härtl, M.; Jaensch, M.: Type and task crossing energy management for fuel cell hybrid electric vehicles with longevity consideration: A deep transfer reinforcement learning framework. Applied Energy, 2024 more…
  • Huang, R.; He, H.; Su, Q.; Härtl, M.; Jaensch, M.: Enabling cross-type full-knowledge transferable energy management for hybrid electric vehicles via deep transfer reinforcement learning. Energy, 2024 more…
  • Jaensch, M.: The future of electric machine development - Emerging trends in the design of automotive traction machines. Future Propulsion Conference, Solihull, 29.02.2024, 2024 more…
  • Jaensch, M.: Development Trends of Electric Drivetrains in the Automotive Industry. NATO Science and Technology Organization, 22.05.2024, 2024 more…
  • Mühlthaler, M.; Härtl, M.; Jaensch, M.: Potential Analysis of Defossilized Operation of a Heavy-Duty Dual-Fuel Engine Utilizing Dimethyl Carbonate/Methyl Formate as Primary and Poly Oxymethylene Dimethyl Ether as Pilot Fuel. SAE International Journal of Engines, 2024 more…
  • Mühlthaler, M.; Prager, M.; Jaensch, M.: Optical study on a heavy-duty natural gas dual-fuel engine applying POMDME as pilot fuel. International Journal of Engine Research, 2024 more…
  • Stark, M.; Kraus, Ch.; Fellner, F.; Jaensch, M.: Combined exhaust gas and optical investigation of methanol DI-engine with focus on the fuel spray-wall interaction. International Journal of Engine Research, 2024 more…
  • Wolff, S.; Schneider, J.; Balke, G.; Zähringer, M.; Büttner, S.; Schuckert, M.; Jaensch, M.: Battery, hybrid electric vehicles—Trucks and buses: And I would drive 500 miles—With batteries? Reference Module in Chemistry, Molecular Sciences and Chemical Engineering, 2024 more…

2023

  • Fellner, F.; Kraus, Ch.; Fitz, P.; Härtl, M.; Jaensch, M.: Unlocking the Potential of Green-Methanol: Indirect Electrification of the Transport Sector. CTI Berlin 2023, 2023 more…
  • Fellner, F.; Miyamoto, A.; Joerg, Ch.; Kraus, Ch.; Härtl, M.; Jaensch, M.: Applications of an Advanced Multiple Injection Calibration Strategy to Address Future Emission Legislation Challenges. SAE International, 2023 more…
  • Gaukel, K.; Pélerin, D.; Dworschak, P.; Haertl, M.; Jaensch, M.: Numerical Validation and Optical Study of Injection of Different Oxymethylene Ether Fuels for Heavy-Duty Application. SAE International Journal of Fuels and Lubricants, 2023 more…
  • Jaensch, M.: The Evolution of the Electric Powertrain - Technology, trends and implications for future testing. 15th International AVL Electric Powertrain Testing Symposium, 20.06.2023, 2023 more…
  • Jaensch, M.: Von Würsten und Camemberts - Aktuelle und zukünftige Entwicklungen im Bereich der elektrischen Antriebe. Electrive Live, 12.12.2023, 2023 more…
  • Karmann, S.; Eicheldinger, S.; Prager, M.; Jaensch, M.; Wachtmeister, G.: Experimental comparison between an optical and an all-metal large bore engine. International Journal of Engine Research (24(3)), 2023, 1223-1238 more…
  • Karmann, S.; Eicheldinger, S.; Prager, M.; Jaensch, M.; Wachtmeister, G.: Optical and Thermodynamic Investigations of a Methane- and Hydrogen-Blend-Fueled Large-Bore Engine Using a Fisheye Optical System. Energies 16(4) (1590), 2023 more…
  • Kawamoto, Y.; Inoue, N; Ito, Y.; Azetsu, A.; Takahashi, S.; Ochiai, M.; Stark, M.; Härtl, M.; Jaensch, M.; Preuss, A.-Ch.; Pryymak, K.; Matz, G.: Visualization of Oil and Fuel Behaviour by Photochromism in Gasoline Engine Under Transient Operating Conditions. JSAE, 2023 more…
  • Kraus, Ch.; Fellner, F.; Miyamoto, A.; Sauerland, H.; Härtl, M.; Jaensch, M.: Injector Design and Fuel Pressure Variation for Oxygenated Spark Ignition Fuels. SAE International, 2023 more…
  • Kraus, Ch.; Thamm, F.; Retzlaff, M.; Gadomski, B.; Fitz, P.; Härtl, M.; Hoppe, St.; Jaensch, M.: Highly Efficient and Clean Combustion Engine for Synthetic Fuels. SAE International, 2023 more…
  • Kraus, Ch.; Fellner, F.; Miyamoto, A.; Sauerland, H.; Härtl, M.; Jaensch, M.: Cold Start Performance of Sustainable Oxygenated Spark Ignition Fuels. SAE Technical Paper Series, Society of Automotive Engineers of Japan, 2023 more…
  • Pöllmann, S.; Härtl, M.; Jaensch, M.; Wachtmeister, G.: Evaluation of strategies to optimize engine efficiency and NOx emissions with the synthetic diesel fuel oxymethylene ether. International Journal of Engine Research, 2023 more…
  • Schröder, A.; Eicheldinger, S.; Prager, M.; Jaensch, M.: Experimental mild conversion of a lean burn natural gas engine with SCR to a hydrogen engine: NOx and GWP potential for marine applications. International Journal of Engine Research (24(6)), 2023 more…
  • Stark, M.; Härtl, M.; Jaensch, M.; Preuss, A.-Ch.; Pryymak, K.; Matz, G.; Gohl, M.: Clarification of Fuel and Oil Flow Behavior Around the Piston Rings of Internal Combustion Engines -Simultaneous analysis of oil flow behavior and oil. JSAE, 2023 more…

2022

  • Binder, J.; Krecker, O.; Kraus, C.; Jaensch, M.; Wachtmeister, G.;: Analysis of the Piston Group Friction in a Single-Cylinder Gasoline Engine When Operated with Synthetic Fuel DMC/MeFo. SAE Technical Paper Series, SAE International, 2022 more…
  • Eicheldinger, S.; Waligorski, D.; Wachtmeister, G.; Jaensch, M.: Performance Potential of Hydrogen Combustion Engines for Industrial Applications. MTZ worldwide 83 (10), 2022, 60-64 more…
  • Eicheldinger, S.; Waligorski, D.; Wachtmeister, G.; Jaensch, M.: Leistungspotenzial von Wasserstoffverbrennungsmotoren für Industrieanwendungen. Motortechnische Zeitschrift (MTZ) 10 (10), 2022 more…
  • Gelner, A. D.; Pang, G. A.; Weber, M.; Haisch, C.; Beck, H. A.; Pastoetter, C.; Härtl, M.; Jaensch, M.; Wachtmeister, G.: Gaseous emissions of a heavy-duty engine fueled with polyoxymethylene dimethyl ethers (OME) in transient cold-start operation and methods for after-treatment system heating. Environmental Science: Advances (4), 2022, 470-482 more…
  • Gelner, A. D.; Rothe, D.; Kykal, C.; Irwin, M.; Sommer, A.; Pastoetter, C.; Härtl, M.; Jaensch, M.; Wachtmeister, G.: Particle emissions of a heavy-duty engine fueled with polyoxymethylene dimethyl ethers (OME). Environmental Science: Atmospheres (2), 2022, 291-304 more…
  • Gleis, S.; Frankl, S.; Prager, M.; Jaensch, M.; Wachtmeister, G.: Optical investigation of a diffusive „high-pressure gas-diesel“ combustion process for methane and other future e-fuels. 12. Dessauer Gasmotorenkonferenz, 2022 more…
  • Härtl, M.; Kraus, Ch.; Jaensch, M.: Electrification and E-Fuels - The Future of Otto- and Diesel-Engines. Wiener Motorensymposium, 2022 more…
  • Jörg, Ch.; Yasukawa, Y.; Kleinmann, A.; Yoneya, N.; Sauerland, H.; Miyamoto, A.; Fellner, F.; Fitz, P.; Wachtmeister, G.; Jaensch, M.: Model-Based Gasoline Direct-Injection Control for Robust Emission Reduction. 43rd International Vienna Motor Symposium 2022, 2022 more…
  • Kacetl, Tomas; Kacetl, Jan; Fang, Jinyang; Jaensch, Malte; Goetz, Stefan: Degradation-Reducing Control for Dynamically Reconfigurable Batteries. , 2022 more…
  • Karmann, S.; Weber, S.; Stürzl, W.; Prager, M.; Jaensch, M.; Wachtmeister, G.: Development of an Optical Investigation Method for Diesel and Oxymethylene Ether Spray in a Large-Bore Dual-Fuel Engine Using a Fisheye Optical System. SAE International Journal of Engines V132-3EJ, 2022 more…
  • Kraus, Ch.; Fitz, P.; Fellner, F.; Härtl, M.; Jaensch, M.: Exhaust Gas Analysis of Various Potential GHG-Neutral Synthetic Fuels and Gasoline/Alkylate-Blends Including Variable Injection Timings. SAE Technical Paper Series, SAE International, 2022 more…
  • Kraus, Christoph; Jakubec, Philipp; Girhe, Sanket; Fellner, Felix; Härtl, Martin; Jaensch, Malte; Wachtmeister, Georg; Pitsch, Heinz: Adaptation and Engine Validation of an FTIR Exhaust Gas Analysis Method for C1-Based Potential GHG-Neutral Synthetic Fuels/Gasoline-Blends Containing Dimethyl Carbonate and Methyl Formate. SAE Technical Paper Series, SAE International, 2022 more…
  • Mitsufuji, K.; Hosaka, T.; Yoneya, N.; Bariki, C.; Beeckmann, J.; Pitsch, H.; Kraus, Ch.; Fellner, F.; Jaensch, M.: Laminar Burning Velocity Model and Combustion Simulation of Dimethyl Carbonate / Iso-octane Mixture. Journal of the Combustion Society of Japan, 2022 more…
  • Stark, M.; Preuss, A.-Ch.; Pryymak, K.; Azetsu, A.; Mihara, Y.: Fuel Oil Flow Measurement – Clarification of fuel and oil flow behavior around the piston rings of internal combustion engines. FVV, 2022, more…
  • Stark, M.; Preuss, A.-Ch.; Pryymak, K.; Azetsu, A.; Mihara, Y.: Fuel Oil Flow Measurement FVV Nr. 1396 Tagungsbandbericht. FVV, 2022, more…

2021

  • Kacetl, Jan; Kacetl, Tomas; Jaensch, Malte; Goetz, Stefan M.: Novel Low-Side/High-Side Gate Drive and Supply With Minimum Footprint, High Power Density, and Low Cost for Silicon and Wide-Bandgap Transistors. IEEE Transactions on Power Electronics 36 (7), 2021, 8219-8229 more…

2017

  • Kacetl, Jan; Kacetl, Tomas; Korte, Christian; Specht, Eduard; Jaensch, Malte; Goetz, Stefan: Increase of the allowable switching rate of wide-bandgap semiconductors through spectral control in a 12 V to 48 V gallium-nitride DC/DC converter. 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), IEEE, 2017 more…
  • Song, Deru; Schwaiger, Kurt; Korte, Christian; Stark, Christian; Luetje, Till; Jaensch, Malte; Goetz, Stefan: Highly dynamic multiphase wide-bandgap DC-DC converter for automotive active suspension systems. 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia), IEEE, 2017 more…

2012

  • Malloy, A.C.; Martinez-Botas, R.F.; Jaensch, M.; Lamperth, M.: Measurement of heat generation rate in the permanent magnets of rotating electrical machines. 6th IET International Conference on Power Electronics, Machines and Drives (PEMD 2012), IET, 2012 more…

2008

  • Lamperth, M.U.; Beaudet, A.; Jaensch, M.: Disc motors for automotive applications. Hybrid & Eco Friendly Vehicles Conference 2008 (HEVC 2008), IEE, 2008 more…

2007

  • Jaensch, M; Lampérth, M U: Development of a multi-degree-of-freedom micropositioning, vibration isolation and vibration suppression system. Smart Materials and Structures 16 (2), 2007, 409-417 more…
  • Jaensch, M; Lampérth, M U: Investigations into the stability of a PID-controlled micropositioning and vibration attenuation system. Smart Materials and Structures 16 (4), 2007, 1066-1075 more…
  • Jaensch, M; Young, I R; Besant, C; Atkins, A; Lamperth, M: Development of the technical capabilities needed to build and position a prepolarization coil for a magnetic resonance imaging magnet. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 221 (2), 2007, 185-194 more…
To top